1. V Slot Cutter Knives
  2. V Slot Laser Cutter
  3. V Slot Cutter Tool
  4. V Slot Cutter
  5. 45 Degree V-slot Cutter

Choose from our selection of V-slot milling cutters in a wide range of styles and sizes. In stock and ready to ship. Double Angle End Mills (also known as V-slot milling cutters) have a diamond-shaped cutting head profile with peripheral teeth, and are designed for machining a V-shaped slot in one pass, as well as milling notches, chamfers, serrations, and angles. Cutting conditions and parameters ( slot milling Cutter: a single fluted solid carbide end-mill, R = 10 mm, β = 45, αr = 5 Work material: carbon steel EN8 Cutting condition: with fluid Cutting parameters: spindle rotation speed n = 1114 rpm (cutting speed v = 70 m/min), feed rate ft in mm/tooth.

Our very own production of the brilliant V-Slot Linear guide rail, manufactured right here in Portugal to exact OpenBuilds spec and dimensions. Completely compatible with all other 'V-Slot' designs, parts, and hardware. All profiles available in Natural and Black Anodized finish.
Slot

11 Item(s)

per page

GridList

  • V-Slot 2040

    Starting at: €2.58

  • V-Slot 2020

  • V-Slot 2060

    Starting at: €3.22

  • V-Slot 2080

  • C-Beam

  • V-Slot 2060 Natural - Custom Size Cut

    €0.00

  • V-Slot 2060 Black - Custom Size Cut

  • V-Slot 2080 Natural - Custom Size Cut

    €0.00

  • V-Slot 2080 Black - Custom Size Cut

  • C-Beam Natural - Custom Size Cut

    €0.00

  • C-Beam Black - Custom Size Cut

11 Item(s)

per page

GridList

Hello to all.
I have created a jig to hold a piece of material that is 1.5' wide, 1' thick and 5' long.
The .25' slot was created with a simple rectangle, 3' long located in the center of the material.

V Slot Cutter Knives


KnifeWhen creating the tool path (and in actual operation), the tool path wants to start at the center of the material, move up the 'Y' axis (1.5') lift and return to center. It performs this task 9 times (I'm still very green when it comes to tool loads) The tool path then returns to center, and performs the same operation moving down the 'Y' axis (1.5') until the slot is complete. V slot cutter knives
The material I am milling the slot in is yellow pine and because of that, the material pieces may vary slightly. This of course cause a little slop in the jig. The slot isn't do or die critical but I would like it to be somewhat uniform. With the way the slot is being cut there is sometimes a little bump in the center of the slot caused by the rotation of the tool and the direction of travel on the 'Y' axis. IE. moving up the 'Y' axis the material may twist slightly to the right and when moving down the 'Y' axis the material may twist left.

V Slot Laser Cutter


Explaining all that.... (sorry so verbose..) ..
I am trying to figure out how to mill a .25' slot in the center of the material using a single direction 3' long pass. I'm not worried about the number of passes it takes to clear 1' of material (although any and ALL advise is appreciated..)
I am using a .25' end mill.
I have 80 pieces of material to slot... I sure would appreciate any assistance.

V Slot Cutter Tool


Thank you ..Cutter

V Slot Cutter

Bob Moody
Huntsville, TX

45 Degree V-slot Cutter

http://moodychristmas.weebly.com